How Light Is Used To Create Images-3

by William Lulow

In the old days, most studio photography was done with theatrical hot lights. And, they were just that…HOT. Flash has actually been around almost since the beginning of the photographic process in the early 1800s. Photographers used a mixture of potassium chlorate with other substances and ignited it in a flash bar to produce a brief, intense flash of light. Sometimes it was accompanied by a loud noise as well.

PowderFlashGun

 After that came the flash bulb which was a glass bulb that contained crumpled up aluminum in an environment of oxygen. It was ignited by an electric current produced from a battery. Today’s electronic flashes are made with a small flash tube that contains xenon gas that is ignited from an electric charge produced by modern batteries. It produces a short, bright flash of light.

EarlyFlashBulbIn the past, it was difficult to synchronize the flash with the camera’s shutter. The camera had to be mounted on a tripod and the lens opened before the flash was ignited. Later, it was also hard to synch the flash with the shutter. There was a “B” (bulb) setting that delayed the opening of the shutter for a fraction of a second until the flash bulb reached its peak of illumination. Today, modern electronic flash units can be synched to fire instantaneously when the shutter opens.

On camera type flash
On camera type flash

It is important to understand the basics of artificial light before one begins to work with electronic flashes, but most people will just go out and buy a small flash unit that can fit in their camera’s hot shoe and just snap away. Flash units that are mounted onto cameras, or the built in flash units that accompany most modern cameras are limited in the kind of light they provide. The light comes from the same spot as the camera and produces a harsh, flat light that is basically only good for illumination, that is, to provide light when there is not enough ambient light to take a picture.

If you want to begin to be creative with your use of light, you will need to purchase one or more units that can be operated OFF the camera. These will have to be mounted on light stands or placed in other positions around the studio or wherever you are shooting.